| Main > Software Forum |
| MAME and Touchscreen Support - Megatouch Emulation **SOLVED** |
| (1/1) |
| JdotFite:
I am struggling to find concrete information on the topic of MAME and touchscreen support. I have a touchscreen monitor and have been fiddling with the Megatouch XL 6000 rom but I can't get the touch to register correctly. The best that I have come up with is to set the Lightgun Input Provider to win32. The problem is that I think the first touch sets the coordinates and then I need to touch again in that area to register the touch. I haven't been able to figure out a better method or work around to get the first touch to almost "double" click. * I tried setting the mouse input provider to win32 and dinput, but the calibration was always off. * I tried adjusting the monitor to match the games resolution of 640x480 thinking that might help with the positioning, but it did not. * I tried playing with the calibration tool in Megatouch, but that didn't work. * I tried creating an AHK script that would send a keyboard letter when the screen is touched (left mouse button is clicked), but the "virtual" key, while seen in windows and MAME UI, does not register in MAME itself. * I tried changing the keyboard input provider to see if it would allow the "virtual" key to show up in MAME, but none of the options made a difference. I can't seem to dig up munch information on this topic and I am hoping someone here has gone down this path before and can provide some insight. |
| JdotFite:
I dug up an old thread from 16 years ago on here and it looks like there was possible success using an Elo screen and enabling "mouse emulation mode". I believe this changes the touch behavior of the touchscreen in windows and actually moves the mouse around when you touch. I tried turning on the virtual touchpad in windows and I guess it would work similar'ish to this but be full screen and hidden. https://forum.arcadecontrols.com/index.php/topic,76684.0/all.html |
| JdotFite:
It didn't look like HP had any software related to the touchscreen I am using (HP L6015tm) so tried installing Elo's control panel software to see if maybe I could turn on their ForceMouse mode. Unfortunately, I couldn't apply any settings once inside the application. At this point, I understood that I essentially needed the touchscreen to act like a trackpad. I wondered if a trackpad driver could somehow replace the generic mouse driver for the touchscreen. I eventually came across a few comments about software called Tablet Pro STUDIO which I believe is an evolution of software that was originally called touchmousepointer. The links to touchmousepointer were all dead, but after some digging I was able to find what I believe was the final version "touchzoomdesktop2105". I am happy to say that things are working! :applaud: In summary (in case someone stumbles upon this in another 16 years) MAME: Input Device Options: * Lightgun Device Assignment: Mouse * Lightgun Input Provider > win32 Advanced Options: * Mouse On * Lightgun On Install TouchZoomDesktop Component (touchzoomdesktop2105) Settings > Pinch > Mode > Touch to Mouse Mode I haven't played around with the other settings in TouchZoomDesktop yet. I am excited that I can move forward with a new bartop touchscreen build! |
| Chad6862:
This helped me so much thank you! I am very interested in the version of mega touch you are using as I have 2006. |
| Navigation |
| Message Index |