Main > Monitor/Video Forum

Kortek MP-KT2182 Opinion

Pages: (1/1)

Montani:

Just got a new machine. Just have a vertical line down the middle. Guessing something on the chassis, but I am out of my league. Know who repairs these if it is a chassis issue? Thanks for any help.

lilshawn:

that's an odd issue. horizontal collapse... but not totally? or maybe sync problem?

must have a seperate circuit to drive the yoke... seperate from the flyback HV (usually these things are tied together.)

i say it's not totally collapsed... because if it was the line would only be a few MM wide. (like an 1/8")

Montani:

I'm out of my league. I've verified the display from the global vr PC on a separate monitor. Something is up with this chassis. Appreciate any info on who can refurb these.

lilshawn:

where you at? maybe someone close by can chime in or has the experience to give you a hand with it.

other than that you are going to be shipping it off... arcadecup if you are east coast ... but i hear they can have a pretty big backlog and sometimes it can take a month to get to your chassis... but i have heard great things about their service.

Montani:

--- Quote from: lilshawn on January 31, 2024, 08:11:40 pm ---where you at? maybe someone close by can chime in or has the experience to give you a hand with it.

other than that you are going to be shipping it off... arcadecup if you are east coast ... but i hear they can have a pretty big backlog and sometimes it can take a month to get to your chassis... but i have heard great things about their service.

--- End quote ---
Morgantown. About an hour south of Pitt. I think my yoke is bad and not the chassis. Had .9ohms on the blue and red wire. Pulled it and has a couple bad spots.

Pages: (1/1)