| Main > Consoles |
| Dreamcast in a cabinet.. |
| (1/2) > >> |
| jlampc:
I have a new cabinet and I would like to try to put a dreamcast in it. I have about 200 games for it and would like to figure a way to use it. The Cab has a medium resolution Arcade monitor connected to a jamma harness..I am pretty lost. I've been looking for an RGB part for the Dreamcast and have been unsuccessful. If anyone has experience with this lemme know!!! ThanX :D |
| gnateye:
this needs to be in the console section. but to answer your question, it can be done using a dreamcast vga box. you remove a certain pin to force to 15khz or whatever. search around i have seen people talking about this in the console forum before good luck 8) |
| Stingray:
Seems to me that it would be MUCH easier to just sell the arcade monitor and put a TV in the cab. -S |
| gnateye:
which brings us back to the super gun. i plan to add one to my dreamcast cab (which has a 24" svid tv) so i can multi use that cab a little better. |
| Stormy151:
I had been planning to do this as well, since there are a lot of other console emulators that run on the Dreamcast. Then I just decided to run them all from the PC. I would do what Stingray suggested and just use a regular TV instead of an arcade monitor if you can't find the parts you need. |
| Navigation |
| Message Index |
| Next page |