Main > Main Forum

coin mech help

Pages: (1/1)

Thecaver99:

i have a Philips shefras spares limited connected to an ms111 coin mech and having trouble wiring it for the jamma harnes
i have attached the piun out diagram but cant seem to get it to work.

any idea what wires i need to connect up

grantspain:

its about 30 years since i wired one of these credit boards up but you only need 3 wires, 12v and ground and the coin line
the 12v goes to any marked 12v and ground goes to any 0v, i am sure coin line goes to n/o output

Pages: (1/1)

Go to full version