Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Need custom CPO printed from somewhere  (Read 468 times)

0 Members and 1 Guest are viewing this topic.

excaliburlives

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:July 02, 2023, 12:40:15 pm
Need custom CPO printed from somewhere
« on: May 14, 2023, 07:36:38 pm »
   I just had a custom CPO made for me. Now i need it to get it printed somewhere. Who is the best out there right now?

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3544
  • Last login:September 26, 2023, 01:08:44 pm
  • my joystick is bigger than your joystick !
Re: Need custom CPO printed from somewhere
« Reply #1 on: May 15, 2023, 01:04:24 pm »
if you need laminated then gameongraphix

if your panel is under 24" and dont need laminated then I can do it. PM if interested. I have some matte finish sticker paper in stock and semi gloss satin paper(non sticky).

excaliburlives

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 17
  • Last login:July 02, 2023, 12:40:15 pm
Re: Need custom CPO printed from somewhere
« Reply #2 on: May 15, 2023, 08:11:51 pm »
Thanks for the reply. Yeah, i need 36" x 18". Sorry.

SNAAKE

  • Trade Count: (+29)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3544
  • Last login:September 26, 2023, 01:08:44 pm
  • my joystick is bigger than your joystick !
Re: Need custom CPO printed from somewhere
« Reply #3 on: May 16, 2023, 02:06:16 pm »
Thanks for the reply. Yeah, i need 36" x 18". Sorry.

I can do that. 18" is good for my 24" printer  :burgerking:

ive been using this for arcade projects.
https://www.lexjet.com/lexjet-toughcoat-water-resistant-self-adhesive-polypropylene-24in-x-100ft
« Last Edit: May 16, 2023, 02:11:50 pm by SNAAKE »