Arcade Collecting > Restorations & repair

Mortal Kombat 2 Wiring Harness

(1/1)

Thetauri1999:
Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game?

PL1:

--- Quote from: Thetauri1999 on March 06, 2023, 02:22:31 pm ---Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game?

--- End quote ---
According to the KLOV entry about this cabinet, Mortal Kombat II uses a standard JAMMA harness on connector P1.
- Any standard JAMMA harness will be fine as long as it has the -5v lines for audio and you check that pins 25, 26, c, and d are not connected to be sure that you don't get a mis-labeled "CHAMMA" (Chinese JAMMA) harness.

MKII also uses a 4 wire "kick" harness on connector P5 with "Low Punch" and "Low Kick" for P1 and P2.

Here are the pinouts for MKII wiring.
https://www.arcade-museum.com/pinouts-game/8756.html


Scott

Navigation

[0] Message Index