| Arcade Collecting > Restorations & repair |
| Mortal Kombat 2 Wiring Harness |
| (1/1) |
| Thetauri1999:
Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game? |
| PL1:
--- Quote from: Thetauri1999 on March 06, 2023, 02:22:31 pm ---Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game? --- End quote --- According to the KLOV entry about this cabinet, Mortal Kombat II uses a standard JAMMA harness on connector P1. - Any standard JAMMA harness will be fine as long as it has the -5v lines for audio and you check that pins 25, 26, c, and d are not connected to be sure that you don't get a mis-labeled "CHAMMA" (Chinese JAMMA) harness. MKII also uses a 4 wire "kick" harness on connector P5 with "Low Punch" and "Low Kick" for P1 and P2. Here are the pinouts for MKII wiring. https://www.arcade-museum.com/pinouts-game/8756.html Scott |
| Navigation |
| Message Index |