Main > Monitor/Video Forum
"Fixed" 39k7600 issue, Screen is beautiful but fades dims out 10 minutes later
Customcade:
Will definitely try it, I have not played with any setting's on anything or touched any of the pots for it yet.
It's a nice crisp clear still display when it's working it just fades out after a few minutes after it seems to heat up some.
Ropi Jo:
If you turn the lights down in the room you'll clearly see the tube heaters. Watch for the heater going out when the issue occurs.
Customcade:
It ended up being bad solder joints from the manufacture.
Mine all still looked solid shiny and purdy from the cap work I did a decade ago.
I seen at least three points that didn't look good at all so I got those three and then there was about ten more that were questionable if they had a hairline crack so I just hit them all with some heat and added a little fresh solder since I already had it out might as well type thing.
Put it back in and I let it run for 2-3 and was perfect but now the screen was actually too bright where the black was more grey and the white color was too rich so I just barely touched the screen pot on the flyback and turned it down a hair and boom it looks like a brand new screen again.
Thanks for all the help and suggestions, glad it was a free fix and one I could tackle with all of your help again.
buttersoft:
glad it was a simple fix!