| Main > Consoles |
| Is there any good original OG Xbox controller break out boards available? |
| (1/1) |
| Customcade:
What's everyone's go to for original Xbox controller breakout encoders? I took the guts out of the Sony SCPH-1110 dual joystick and want to put a controller board in it that works on the Xbox. I originally stuffed a hard wired original controller S PCB strait up in it and it worked like a champ but it took me some time doing it all manual and custom. All I can say is you never played Mech assault proper until you have played it on one of my setups 😎 |
| PL1:
--- Quote from: Customcade on November 12, 2022, 06:28:53 pm ---I took the guts out of the Sony SCPH-1110 dual joystick and want to put a controller board in it that works on the Xbox. --- End quote --- Based on a few pictures of the guts of that controller, it will be easy to connect to the potentiometers, but tapping into the buttons on the PCB might be tricky. :dunno If you want to try an Arduino-based encoder, check out either Bruno's XBOXPadMicro . . . http://forum.arcadecontrols.com/index.php/topic,152687.0.html . . . the XInput version of the firmware for the Micro . . . http://forum.arcadecontrols.com/index.php/topic,152687.msg1634808.html#msg1634808 . . . imp's XInput version of the firmware for Pro Micro . . . http://forum.arcadecontrols.com/index.php/topic,152687.msg1674092.html#msg1674092 . . . or Bruno's KADE miniArcade 2.0. http://forum.arcadecontrols.com/index.php/topic,154126.0.html XBOXPadMicro: - Tested working and documented with the Arduino Micro or Pro Micro. - Has several XInput firmware versions. - Have to edit source and compile to customize pin/port assignments. KADE miniArcade 2.0: - Tested working and documented with many more 32u4 boards. - Has no XInput firmware versions. - Don't have to edit source and compile to customize pin/port assignments. Scott |
| Navigation |
| Message Index |