Software Support > GroovyMAME

Vertical cab monitor issue

(1/3) > >>

mikehaggar:
Hi all, got a vertical cab the other day but the guy must have put the monitor in upside down as when I set mame to vertical in the ini file its upside down. What setting do I change in the uni to flip it the right way round? Thanks.

abispac:

--- Quote from: mikehaggar on September 20, 2022, 04:20:42 pm ---Hi all, got a vertical cab the other day but the guy must have put the monitor in upside down as when I set mame to vertical in the ini file its upside down. What setting do I change in the uni to flip it the right way round? Thanks.

--- End quote ---
on mame.ini its either

rotate left   1

or

rotate right  1

buttersoft:

--- Quote from: mikehaggar on September 20, 2022, 04:20:42 pm ---[T]he guy must have put the monitor in upside down...
--- End quote ---

There kinda isn't such a thing as upside down when it comes to arcade tubes. You flip them to hide screen burn, and then flip the yoke connectors on the PCB or use the dip switches there.

Calamity:
Depending on what side the CRT is mounted, either -autoror or -autorol in mame.ini will do the trick.

mikehaggar:
Thanks for help guys. Putting a - before the autorols didnt do anything and adding a left or right to rotate 1 didnt do anything either. Any other suggestions?

Navigation

[0] Message Index

[#] Next page