| Main > Everything Else |
| Fretsaw project: Frankenstein's creature |
| (1/3) > >> |
| yamatetsu:
Got the itch to do another fretsaw project. Found a cool pic of Frankenstein's creature. Turned it into a wooden one. |
| yamatetsu:
|
| Ropi Jo:
Took me a while to work out what you were actually doing util I read your other posts. Are you using one of those spiral type blades or a flat blade? |
| yamatetsu:
I'm using a very fine flat blade. I tried spiral blades, but, while it's actually easier cutting corners and tight radiuses (radii ?) using a spiral blade, even the finest blade makes a quite bigger cut. I'm using the cutouts to align the pieces I'm glueing to the backer board and found that it's going out of whack because the spiral blade removed too much material. Also, the spiral blade I used does a much rougher cut than the flat blade, which required me to do much more sanding to get a result that still didn't look quite as smooth. |
| bobbyb13:
Cool stuff. What size stock are you using? |
| Navigation |
| Message Index |
| Next page |