Main > Consoles
Neo Geo
pbj:
Got some 3D printed parts from PL1 today.
Here’s the translucent reset button with a flashlight laying inside the case and pointed at it. I really need to decide on an LED and just go with it.
And here’s the octagon gate installed. I didn’t test it before I put everything back together. Oops. Can’t hit diagonals. I’ll crack the stick open again and adjust the switch levers, but this definitely does not have the issues that chopper experienced.
A guy on discord that actually does a lot of repairs tells me my graphics issue is a bad connection from the bios chip to one of the downstream chips. I’m skeptical but it’s worth a shot.
:cheers:
PL1:
--- Quote from: pbj on September 21, 2022, 11:34:44 pm ---Here’s the translucent reset button with a flashlight laying inside the case and pointed at it.
--- End quote ---
Looks good. :cheers:
--- Quote from: pbj on September 21, 2022, 11:34:44 pm ---And here’s the octagon gate installed. I didn’t test it before I put everything back together. Oops. Can’t hit diagonals. I’ll crack the stick open again and adjust the switch levers, but this definitely does not have the issues that chopper experienced.
--- End quote ---
Before you adjust the levers, try the flat blue plate with no microswitch nubs.
That's this model that Chopper linked to earlier with an extra 1.5mm travel for hitting a diagonal.
--- Quote from: PL1 on September 10, 2022, 03:35:12 pm ---Chopper model print:
- 19.62mm point-to-point on octagon (1.5mm more from the center to the gate)
- 18.45mm flat-to-flat on octagon (1.475mm more from the center to the gate)
- 2.16mm thick plate (0.08mm thinner plate)
--- End quote ---
While you've got the stick cracked open, what is the diameter of the part of the actuator that engages the restrictor plate on your stick?
Scott
pbj:
This morning I buzzed out every connection on the bios chip to the downstream chips. I did not find any breaks.
Opened up the 161 cart and didn’t see any obvious problems. Pushing on chips and stuff didn’t change anything.
I think at this point I’m going to have to buy a legit copy of one of the glitchy games and see if the problem persists there.
For now, I put it all back together and I’ll enjoy the ones that work.
Pinball led soldered in and pointing at PL1s translucent reset button.
:cheers:
nitrogen_widget:
for historical purposes.
Zebidee:
lol, @nitrogen_widget, back in the era when games producers assumed only men (well, boys) could get into computer games.
There is an implied assumption that the gamer would be incapable of snaring a hot chick, so the ad tries to make them feel better about it by further implying that if they get a Neo-Geo they will then have a monster penis (with a face and drool!) that would require at least three hands to properly masturbate.
Geez :dunno
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version