Has anyone been able to get an EMS TopGun II to work with Windows 10?

[ViperStrike]

Hey Guys,

I just rebuilt my Cabinet after it being dead for a few years.
It used to be Win7 32bit running Maximus Arcade.
Now it's a Win10 64bit machine running Launchbox.

I cannot get the drivers to work at all. I tried a bunch stuff from old posts about going into test mode to register the drivers but they are 32bit.
So I figured I'd ask if anyone had any luck.

Starting to think I should try a Sinden, just trying to avoid spending any money at the moment.

[kim_sama_999]

Just get a Sinden or GUN4IR. The EMS Topgun is too complicated to set up

[sk8ersublime]

I was able to get it working on windows 10 64 but but you have to disable driver signing.

[ViperStrike]

I was able to get it working on windows 10 64 but but you have to disable driver signing.

I tried that but the drivers I have would not install.

[sonik]

This gun outputs like an guncon2? It's for use on CRT or LCD screen?

[ViperStrike]

It has external sensors so it can work with LCD.

[sonik]

If it outputs as a guncon2 then you can try my windows driver.
No need to disable windows driver signature.

Take a look
http://forum.arcadecontrols.com/index.php/topic,166121.0.html

[ViperStrike]

It can't hurt to try, thanks

[ViperStrike]

Nothing worked, so I gave up and ordered a Sinden.