Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Space Invaders Garbage Screen  (Read 1132 times)

0 Members and 1 Guest are viewing this topic.

Mike5906

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:December 28, 2022, 06:22:16 pm
  • I want to build my own arcade controls!
Space Invaders Garbage Screen
« on: July 04, 2022, 09:22:47 pm »
I have a Space Invaders Deluxe (Midway L-boardset) that is showing garbage on the screen. Here's a pic.

I have checked on my scope and can see the reset line go low/high within a half second of power on. So I am confident the POR is working. I also can verify pin 6 is properly grounded on the daughter board.

I am assuming it it is a RAM chip, but when I pull the ROMs I do not get the bars you are supposed to get. I still get this garbage screen. I have a box full of 8080As, so I replaced the processor with several others as a test. No change.

I have an EPROM on order but has not arrived so I can't burn a test ROM quite yet.

Any advice? I am kinda stumped. Thanks in advance!!!

Robbbert

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 205
  • Last login:March 27, 2024, 04:46:09 am
Re: Space Invaders Garbage Screen
« Reply #1 on: July 05, 2022, 02:54:16 am »
I have a Space Invaders Deluxe (Midway L-boardset) that is showing garbage on the screen. Here's a pic.
Where's the pic?