| Main > Lightguns |
| Happ guns for emulator setup? |
| << < (4/4) |
| purbeast:
--- Quote from: BadMouth on May 14, 2023, 09:57:37 am ---Having never actually used the device, I'm not sure that I can help much further. Does the resolution and refresh rate of the monitor match one of the supported ones listed in the Opti-Gun manual? --- End quote --- yeah it's a standard CGA monitor in there. And you know, now that I think about it, for some reason, this monitor had issues tracking in the real Friction hardware. I wonder if it is just something with this Friction board and the monitor. I never could figure it out at all. And Friction ran just fine in my KI2 cabinet, which is the monitor I was initially getting feedback on. And also now that I am thinking about it, I initially swapped monitors because I have a switcher in my Maximum Force, and the remote controls wouldn't allow for enough horizontal and vertical adjustments from the remote board, and I basically need to make adjustments after switching to any new game. I'm going to try going back to my KI2 cabinet (which has a NeoTec monitor in it, the one that came with Maximum Force) and see if I can figure out how to get it working in MAME on there, and if I can get that to work, I can always swap monitors back. If I'm going to be running a PC in there with emulators, then I won't have to adjust H/V at all once I initially set it up. (sorry started to ramble to myself lol) |
| purbeast:
So I got my usb2gun board yesterday. It is the one with the JAMMA edge. The first time I powered it on I did not see the device in Windows but I also noticed on the board there were no lights. I was getting video though just fine from the VGA pass through. I turned everything off and noticed there is a jumper that says if the board gets power from the PSU or JAMMA and it was set to JAMMA, and I was using PSU. So I flipped those jumpers and saw red lights come on the usb2gun board so now i know it's getting power. I fired it up again, and again, I'm not seeing anything in the device list in Windows. Anyone know what the problem with this could be? |
| Navigation |
| Message Index |
| Previous page |