Main > Raspberry Pi & Dev Board
what cheaper and simple was to connect a Rpi4 to an arcade monitor are there?
(1/1)
abispac:
So since MiSter boards a bit expensive right now and i found a cheap price Rpi4, im looking for ways to connect it to an arcade monitor. Im aware of stuff, like the vga666 or the pitorgb, but then i came across this video on youtube that claims to have use only a hdmi to vga converter then a simple brekout cable. So i was wondering, if it is true?
Thanks for your time
nitrogen_widget:
so i've only used a super wonky resolution on an rpi3 via hdmi with an hdmi to component adaptor to get 240p on a CRT TV.
it worked bretty good.
i've seen mention of using a gertVGA666 with a cable to combine some signals but never seen a diagram.
people do use the gbs 8100's with a vga out put on the pi to convert to RGB.
https://www.amazon.com/Mcbazel-Arcade-S-VIDEO-Converter-GBS-8100-PC/dp/B07C3H7F6S
now according to this link.
it can be done with a vga666 and one of these to combine the H & V sync for RGB.
https://www.amazon.com/RuiLing-Adapter-Coaxial-Connector-Splitter/dp/B07VNB7ZS7/ref=sr_1_2?crid=1SYCG3RIQK6LW&keywords=T+Shape+3+Way+BNC+Male+to+Double+Female+RF+Coaxial+Adapter&qid=1654824299&sprefix=t+shape+3+way+bnc+male+to+double+female+rf+coaxial+adapter%2Caps%2C125&sr=8-2
https://www.reddit.com/r/crtgaming/comments/764c38/retropie_vga666_retrotink_config_240p_glory/
as for your video, he puts info into the notes but all the links are dead.
but you should be able to get a VGA connector and make a cable using his pinouts then put in his timings.
abispac:
--- Quote from: nitrogen_widget on June 09, 2022, 09:31:33 pm ---so i've only used a super wonky resolution on an rpi3 via hdmi with an hdmi to component adaptor to get 240p on a CRT TV.
it worked bretty good.
i've seen mention of using a gertVGA666 with a cable to combine some signals but never seen a diagram.
people do use the gbs 8100's with a vga out put on the pi to convert to RGB.
https://www.amazon.com/Mcbazel-Arcade-S-VIDEO-Converter-GBS-8100-PC/dp/B07C3H7F6S
now according to this link.
it can be done with a vga666 and one of these to combine the H & V sync for RGB.
https://www.amazon.com/RuiLing-Adapter-Coaxial-Connector-Splitter/dp/B07VNB7ZS7/ref=sr_1_2?crid=1SYCG3RIQK6LW&keywords=T+Shape+3+Way+BNC+Male+to+Double+Female+RF+Coaxial+Adapter&qid=1654824299&sprefix=t+shape+3+way+bnc+male+to+double+female+rf+coaxial+adapter%2Caps%2C125&sr=8-2
https://www.reddit.com/r/crtgaming/comments/764c38/retropie_vga666_retrotink_config_240p_glory/
as for your video, he puts info into the notes but all the links are dead.
but you should be able to get a VGA connector and make a cable using his pinouts then put in his timings.
--- End quote ---
Im pretty capable of building my brekout cable, ive done it to many times now, and by looking at it, it looks like the vga666 plus a break out cable would be a good option, even with the hdmi to vga cable plus the breakout cable loos promising. So i think im gonna give that a try.
Navigation
[0] Message Index
Go to full version