Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Dirty Drivin double gas not working  (Read 1023 times)

0 Members and 1 Guest are viewing this topic.

bubba1212

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:October 11, 2023, 11:54:28 am
  • I want to build my own arcade controls!
Dirty Drivin double gas not working
« on: May 17, 2022, 10:48:19 am »
Running Dirty Drivin (TP) and hitting the gas pedal twice is supposed to jump at certain points in the race.  It doesn't work for me. I know it is minor but my kid loves this game.

Ideas?

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7396
  • Last login:Yesterday at 11:35:47 pm
  • I break stuff...then fix it...sometimes
Re: Dirty Drivin double gas not working
« Reply #1 on: May 17, 2022, 02:29:08 pm »
if you go into the diagnostic menu and select "switch test", check to see that the gas pedal is at zero when it's released and goes to max when pressed down. (should be like 128 or something) make sure the pedal is returning properly. if it is, do a calibration on the wheel/pedal.

pretty sure the computer has to se the value go to ZERO, if it's stopping at 10 or something it wont register you've "released" it.