Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: The Anyway Joystick-8/4/4Angle/2Vert/2Horizontal-leaf switch  (Read 1962 times)

0 Members and 1 Guest are viewing this topic.

slinghit

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:March 09, 2024, 07:22:17 am
  • I like building controls
I have a new, very limited run, product. The Anyway Joystick. Internally it uses a Groovy Game Gear Dominux8 joystick which has the rubber encapsulated steel centering grommet and arcade-quality leaf switches.

I have created a set up that will allow this joystick to select 8way/4way/4way-45 degree/2way horizontal and 2way vertical - mechanically from above panel. You get the feel of the original WICO like joystick but can select the correct configuration for the game. I have been using one for years, on my machine, that uses multiple original PCBs. I just didn't like the feel of the spring type joysticks nor did I want several joysticks on my cabinet to match all the different requirements.



The kit will come with a jig to cut the round hole and shelf needed to install.



I have made three, and can make more if needed, but I can only make, maybe, one every two weeks.

Please ask any questions.

The unit with installation template is $265.00 plus shipping.

I am the person that has been making Front Line Rotary Switches.

Thank again,




« Last Edit: May 17, 2022, 01:17:43 pm by slinghit »