Main > Monitor/Video Forum
Hantarex polo/2 side of screen squashed
Harlock:
--- Quote from: grantspain on June 06, 2022, 11:49:29 am ---i was expecting something like A66EAK501X
anyway there is a resistor on the vertical size circuit and if it dont match the tube then you can adjust side pin but it never goes quite right, in conjunction with little vertical size adjustment
the resistor is R119 and it should be a 1r2 or 0.82, if you have 0.82 then replace with a 1r2 and vice versa
there is also a resistor on the east/west pcb that needs to be checked R9, on some tubes it needs to be removed and others it needs to be 39k
maybe this info will be of some help
--- End quote ---
I didn't have any issue with vertical sizing only horizontal, should I still try changing R9 and R119?
grantspain:
ok polostar so ignore my previous post, the heading of polo 2 confused me