Arcade Collecting > Merit/JVL Touchscreen
I just bought 2 JVL systems, updates on 3 machines 4/22
game_nerd:
--- Quote from: mahkeymike on July 10, 2022, 10:37:29 am ---
--- Quote from: game_nerd on July 09, 2022, 01:19:04 pm --- Is anyone aware of a method to clear that? I'd have thought removing both batteries would clear it, but no dice. I wonder if it's stored in the software somewhere on the sd card.
--- End quote ---
I thought you reimaged it with my HD2 image? That would have wiped the SD card. I wish i could give you more info, but ive had at least 10 encores and fixed probably another 10 and never had one that required an operator pin.
--- End quote ---
I have not yet, I thought that 2nd one may have a bad image on it initially, but it works ok now. I will probably end up reimaging them both, just was holding off to see if I could remove this pin, didn't know if it was stored in memory on the SD card, or some other chip. Whoever owned these things previously put a pin on them, and I don't want to reimage them only to still have the pin there.
all of you guys have been a ton of help, it's all much appreciated. I think I'll try and reimage one this weekend and see what happens. They could use new SD cards anyway I'm sure
game_nerd:
--- Quote from: Spank on July 10, 2022, 08:33:04 am ---I have itouch 8 and 11 iso's if you want.
--- End quote ---
I'd love to get them, pm sent to you
mahkeymike:
--- Quote from: game_nerd on July 11, 2022, 08:03:23 am ---
--- Quote from: mahkeymike on July 10, 2022, 10:37:29 am ---
--- Quote from: game_nerd on July 09, 2022, 01:19:04 pm --- Is anyone aware of a method to clear that? I'd have thought removing both batteries would clear it, but no dice. I wonder if it's stored in the software somewhere on the sd card.
--- End quote ---
I thought you reimaged it with my HD2 image? That would have wiped the SD card. I wish i could give you more info, but ive had at least 10 encores and fixed probably another 10 and never had one that required an operator pin.
--- End quote ---
I have not yet, I thought that 2nd one may have a bad image on it initially, but it works ok now. I will probably end up reimaging them both, just was holding off to see if I could remove this pin, didn't know if it was stored in memory on the SD card, or some other chip. Whoever owned these things previously put a pin on them, and I don't want to reimage them only to still have the pin there.
all of you guys have been a ton of help, it's all much appreciated. I think I'll try and reimage one this weekend and see what happens. They could use new SD cards anyway I'm sure
--- End quote ---
Well, if its stored in the ioboard eeprom as megatouchmike suggested, then reimaging won't do any good. Sounds like you need someone to dump their ioboard eeprom and flash yours. Are you located in the US?
Megatouchmike:
Said it twice already and op wants to mess around with ISOs and images.
It's fine, will be a great learning experience
game_nerd:
--- Quote from: Megatouchmike on July 11, 2022, 11:02:19 pm ---Said it twice already and op wants to mess around with ISOs and images.
It's fine, will be a great learning experience
--- End quote ---
Don't get the wrong idea, I know it was suggested to remove the battery from the io board to clear it, but that didn't work. There's not many eproms on that little board, but I'm not equipped to dump them.
I wanted images for several older vortex machines I have that work, just would like to get them up and running... also figured it wouldn't hurt to have the hd2/3 images for availability down the road, and I though both these encore could use new images with new sd cards, just because it looks like they're both running the original no name ones they came with.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version