| Main > Main Forum |
| Building a Star wars yoke from scratch |
| << < (23/25) > >> |
| Tiger-Heli:
--- Quote from: patrickl on March 23, 2004, 04:20:45 pm --- --- Quote from: Tiger-Heli on March 23, 2004, 12:50:27 pm --- --- Quote from: patrickl on March 23, 2004, 12:26:44 pm --- --- Quote from: Tiger-Heli on March 23, 2004, 11:57:20 am --- --- Quote from: patrickl on March 23, 2004, 11:30:46 am ---That's weird. On my set the gas and brake use a different axis. I have the Performance set with the 3 pedals (with a seperate clutch) The clutch is a third axis. I have not been able to get this to work with Mame btw. So maybe you can configure it to have the gas and brake to work on the same axis? --- End quote --- That's actually what I was hoping - separate axis. Outrun needs this (actually, I think the brake is just a switch, not a pot in the real game), but you don't get brake lights if you use a single axis pedal set. Patrickl, have you tried using MAME analog plus for this. I think it allows you to remap joystick axes, and I'm not sure vanilla MAME does. --- End quote --- I might have to try MAME Analog plus then. The pedal set I have is actually a seperate 3 axis joystick from the steering wheel. It's not like the standard pedals that come with the wheel (where the axis of the pedals are integrated whith the wheel). I have been unable to get both controllers to work at the same time, but I haven't tried very hard either. There was some discussion about Out Run earlier. I thought PaigeOliver said that Outrun was supposed to have a pot gas and brake. I even saw something about people hacking MAME to change this. Can't remember where I saw it though. I'm really hoping it will be a pot controlled pedal one day. --- End quote --- If it's set up as a three-axis stick, I might want to pick a set up. I saw the Outrun thread. I just checked the owner's manual on KLOV. Definitely separate brake and accel pots. Of course all the system16 games in MAME are still being re-written so maybe this will get fixed then. --- End quote --- OK just once more OT. I just tried setting up the Act-LABS stuff in mame32+ and I guess I was just sleeping the previous time I tried. The wheel + 3 pedal (well 2 of them anyway) both work fine in Out Run. I guess a single brake/gas pedal would work fine too btw. --- End quote --- My method of driving OutRun was "Floor the gas, and occasionally downshift through the curves, and ignore the brakes", so a single brake/gas pedal would work. However, my current pedal is single axis and the brake lights don't come on and they should. That's the info that I needed, though. The pedals are all dual axis (one pot per pedal). Thanks! |
| MUKid:
I wonder if anyone will find this question buried way in this thread..... Have you guys found a source for the little spinning light handle things? I know exactly what they are, but I can't find them anywhere. Someplace on the net maybe? Really, really cool project, by the way. |
| menace:
I'll check the store where I got mine and see if there's any left--I was thinking dollar stores or walmart or something along that line would carry them. I'll get back to you--If they have some do you want me to pick you up a set? Anyone else? |
| Stormy151:
I'm actually making my own grips in cast polyurethane. I was planning to mold and cast original grips, but I couldn't get a hold of any- so I've made my own master from wood based on pics of originals and some rough measurements. If it works out I may offer them if anyone's interested... |
| MUKid:
--- Quote from: menace on March 24, 2004, 09:23:06 pm ---I'll check the store where I got mine and see if there's any left--I was thinking dollar stores or walmart or something along that line would carry them. I'll get back to you--If they have some do you want me to pick you up a set? Anyone else? --- End quote --- Yes, I would be interested! Check your PMs. Thanks! |
| Navigation |
| Message Index |
| Next page |
| Previous page |