Golden tee fore complete no sound no video

[Acman2u]

Hi all, I am stuck. I picked up a 2005 fire complete that was missing its monitor/ chassis and was told that it worked before it the monitor died. I installed a paddsun cga-vga adaptor and am getting no video, no sound. The board has one steady flashing led (looks like d5a, right under status 2 in picture) there are no other leds lit, including status 1. On power up the IDE2 led flashes once. I have checked all 3 voltages to the board- all stable. The ide led glows dimly when power is removed from hard drive and glows bright if sw31 is pressed. All chips removed brushed and reseated. I am not sure where to proceed from here. I have worked on other pinballs and have working knowledge of circuits with my HVAC background but this has me stumped. thanks

[classicjoe72]

Are you pulling video directly from the video card or from the JAMMA edge connector?

See:
http://forum.arcadecontrols.com/index.php?topic=153499.0

Looks like a possible solution.