Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Not able to connect MK1 Kick Harness into JAMMA TO CHAMMA ADAPTER  (Read 1452 times)

0 Members and 1 Guest are viewing this topic.

loskiorama

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:February 20, 2022, 10:31:24 am
  • I want to build my own arcade controls!
Hey Guys, I have an original Mortal Kombat 1 cabinet, and I'm having trouble connecting this Jamma to Chamma adapter to my kick harness:
https://www.mikesarcade.com/cgi-bin/store.pl?sku=JA-CHAMMA
The problem is that my kick harness connector has a blocked "socket" as you can see in the picture below:

I can remove the connector and solder the wires directly to the JAMMA TO CHAMMA board, but I'm not sure which pin corresponds to which cabe
All I know is what each cable represents on my kick harness as this MK1 arcade manual shows
, but I need to know this for the adapter as well to make it work.

Any help would be appreciated