Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: arcade game factory marquee  (Read 1006 times)

0 Members and 1 Guest are viewing this topic.

tony.silveira

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 691
  • Last login:June 29, 2022, 12:15:31 am
    • my baby
arcade game factory marquee
« on: February 14, 2022, 09:07:06 pm »
hey guys,

i ordered a couple from the site for two of my partycades and i love them, they look great!

but iím not sure if i have them wired correctly?  i wired them to the on/off switch of the partycade as in the directions but now the on/off switch simply controls the marquee; the partycade is always on and i have to unplug it to turn it off. 

is there anyway to get these to light up when turning the machine on with the on / off switch?

iíve tried emailing the site twice with em zero response.

thanks!

GzStation

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:June 06, 2022, 06:40:35 pm
  • I want to build my own arcade controls!
Re: arcade game factory marquee
« Reply #1 on: February 15, 2022, 04:31:33 am »
Hi! As I understand, there is one outlet Controles by the switch and one always stay live. I think you should add a splitter on the one that is controlled by the switch to connect both of them. From my partÖ. What I have done, I put a controller Phillips Hue 552349 so I can control it with Siri or Alexa and my phone to use my marquee as an ambience lite and I have plugged my 5V adapter to my iPac Ultimate I/O so my LED Controller can lite too ;-)