April 25, 2024, 08:05:47 am
Home
Help
Search
Login
Register
News:
Support this site
Shop
Amazon Arcade Stuff
through our link. Thank you!
Forum notices to gmail.com addresses are working. Microsoft addresses are still not.
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Where to start diagnosing this WG 7200 chassis?
Main
Restorations
Software
Audio/Jukebox/MP3
Everything Else
Buy/Sell/Trade
Project Announcements
Monitor/Video
GroovyMAME
Merit/JVL Touchscreen
Meet Up
Retail Vendors
Driving & Racing
Woodworking
Software Support Forums
Consoles
Project Arcade
Reviews
Automated Projects
Artwork
Frontend Support Forums
Pinball
Forum Discussion
Old Boards
Raspberry Pi & Dev Board
controls.dat
Linux
Miscellaneous Arcade
Wiki Discussion
Old Archives
Lightguns
Arcade1Up
Try the site in https mode
Site News
Unread posts
|
New Replies
|
Recent posts
|
Rules
|
Chatroom
|
Wiki
|
File Repository
|
RSS
|
Submit news
« previous
next »
Send this topic
Print
Pages: [
1
]
Go Down
Author
Topic: Where to start diagnosing this WG 7200 chassis? (Read 1219 times)
0 Members and 1 Guest are viewing this topic.
dmoore11
Trade Count:
(
0
)
Jr. Member
Offline
Posts: 1
Last login:February 11, 2022, 04:34:46 pm
I want to build my own arcade controls!
Where to start diagnosing this WG 7200 chassis?
«
on:
February 11, 2022, 03:47:08 pm »
Hey guys, I turned on my Journey game and all the sounds were there but no picture. I opened up the back and saw that there was no glow in the monitor neck at all so tested the voltages running from the power supply to the chassis and it was good. I checked the fuse on the chassis with multi meter and it was good. The chassis model info is WGE1972-HOGS39L and it is clean as whistle and looks brand new. I did notice the original caps were all still there with the white epoxy still on the base of each cap and the board. I'm fixing to pull up the schematics but thought I would see if you guys might be able to point out a direction to go in.
Thanks in advance for any help! -D
Logged
buttersoft
Trade Count:
(
+1
)
Full Member
Offline
Posts: 1758
Last login:April 21, 2024, 08:06:32 am
Is running at 15kHz
Re: Where to start diagnosing this WG 7200 chassis?
«
Reply #1 on:
February 11, 2022, 11:34:59 pm »
When you turn the screen pot on the flyback to either end, do you see anything on the tube? Can you feel static when you put the back of your hand almost against the front glass?
Logged
Send this topic
Print
Pages: [
1
]
Go Up
« previous
next »
The NEW Build Your Own Arcade Controls
|
Main
|
Monitor/Video Forum
|
Where to start diagnosing this WG 7200 chassis?