| Main > Lightguns |
| Guncon2 and Guncon3 windows driver |
| << < (3/15) > >> |
| shiryu55:
I am the other interested party, it only remains to add that guncon2 appears in the device panel as if the driver was not installed correctly. It appears with the typical icon as if it was not recognized by Windows. A greeting from Spain |
| sonik:
@GustavoALara The tool must be kept open for the mouse to move. And yes, the gun can't detect darker areas. CRT lightgun games uses brighter images or does a "fast white flash" when you pull the trigger, so the gun can detect. @shiryu55 Installed the driver from github? |
| psakhis:
Hi, Anyone knows if this driver works on W7? EDIT: works but it disconnects at random. I don't understand calibration tool at all... |
| sonik:
GC2 or GC3? I remember to get some GC2 disconnects if gun is too close to the crt. Can't figure why this happens and can't fix. |
| phasermaniac:
Hi! I had some disconnection problems years ago, although my problem was not with the distance to the crt, but the connection itself. I don't remeber what I did to solve it as it was ages ago, but @Foxhole, who seems to use a configuration similar to mine, messed with it more recently: http://forum.arcadecontrols.com/index.php/topic,159617.0.html --- Quote ---I have a EMS USB 2 which converts the guncon1 to guncon 2, but i'm having issues with it. It works for 3-5 seconds and then the gun stops working, even the buttons, though the led on the converter itself is still on. It may be due to how i have my sync wired up though. --- End quote --- --- Quote ---Enabled csync on vmm, removed vsync wire, removed resistor, connected everything back, connected the ems usb2 converter, g-con 45 now works. --- End quote --- Maybe this helps |
| Navigation |
| Message Index |
| Next page |
| Previous page |