Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Help programming ipac4  (Read 622 times)

0 Members and 1 Guest are viewing this topic.

Sarlo

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:January 23, 2022, 01:04:42 pm
  • I want to build my own arcade controls!
Help programming ipac4
« on: January 23, 2022, 01:04:42 pm »
I'm using the ctrl alt p method to remap the keys to my ipac 4 (old model) from my slikstik.  Everything is working fine except my player 1 joystick won't take up/down/left/right.  When i mpa other keys it accepts it and says "done"...when I map the joystick keys it says "one".  I have pasted the notepad file below if that helps.

 *** i-pac interactive programming and test mode ***

    t for button test mode
    l to list current config
    r to reset eeprom to mame defaults
    e to save and exit
    a to abort
    or press switch you want to program

    coin 3  = 7       
   4 right = -         
    coin 4  = 8       
   4 left  =           
    start 3 = 9    3   * shift *
    4 up    = *         
   start 4 = 0         
    4 down  = +       
   3 right = l         
    4 sw 1  = del     
   3 left  = j         
    3 up   = h       
   3 down  = k         
    4 sw 2  =       
   3 sw 1  =           
    4 sw 3  = '       
    3 sw 2  = 5         
    4 sw 4 =       
    3 sw 3  = m         
    4 sw 5  =         
    3 sw 4  =           
    4 sw 6  = ]         
    3 sw 5  = o         
   4 sw 7 = \         
    3 sw 6  = b         
   4 sw 8  = p         
    3 sw 7  = t         
   3 sw 8  = p         
    coin 1  = 3         
    2 right = g         
    coin 2  = 4         
    2 left  = d         
    start 1 = 1      1   * shift *
    2 up    = r         
    start 2 = 2         
    2 down  = f         
    1 right =        tab
    2 sw 1  = a         
    1 left  =        entr
    1 up    =        `   
    1 down  =        f12
    2 sw 2  = s         
    1 sw 1  = lctl       
    2 sw 3  = q         
    1 sw 2  = lalt       
    2 sw 4  = w         
    1 sw 3  = spce       
    2 sw 5  = e         
    1 sw 4  = lshf       
    2 sw 6  = [         
    1 sw 5  = z         
    2 sw 7  = ]         
    1 sw 6  = x         
    2 sw 8  = p      esc
    1 sw 7  = c         
    1 sw 8  = p      esc
done
    press next switch or e to exit
    exiting...codes saved.
 *** i-pac interactive programming and test mode ***

    t for button test mode
    l to list current config
    r to reset eeprom to mame defaults
    e to save and exit
    a to abort
    or press switch you want to program
    1 up       press keyboard key to set..   one
    1 right    press keyboard key to set..   one
    press next switch or e to exit
     1 left     press keyboard key to set..   one
    press next switch or e to exit     1 down     press keyboard key to set..   one
    press next switch or e to exit

    exiting...codes saved.
   press next switch or e to exit