Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


Author Topic: Mc288 pentranic chassis impedance  (Read 3306 times)

0 Members and 1 Guest are viewing this topic.


  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:January 24, 2022, 12:03:28 am
  • I want to build my own arcade controls!
Mc288 pentranic chassis impedance
« on: November 29, 2021, 07:55:33 am »
Hello people, how are you, my pentranic brand crt is already for replacement has the match spent and the grid run so I opted to swap in Argentina it is very difficult to find a pentranic brand crt in good condition so I opted for the crt tube replacement, my Question is if anyone knows that Impedances drives the MC288 pentranic chassis to be able to make a replacement.  Or if anyone knows where I can find information on the pentranic chassis.  From already thank you very much


  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6903
  • Last login:Today at 06:30:30 pm
  • I break stuff...then fix it...sometimes
Re: Mc288 pentranic chassis impedance
« Reply #1 on: November 29, 2021, 04:20:47 pm »
best to find same or similar CRT tube from old TV and change the "yoke" from old CRT to new CRT.

also the

Pentranic CH-288
Pentranic CH-288A
Makvision 1425
Makvision 2425

models are all same CRT with different names. maybe one of those you can find instead.