Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Megatouch "Checking clear"  (Read 3760 times)

0 Members and 1 Guest are viewing this topic.

arcadezz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:June 21, 2022, 08:32:03 am
Megatouch "Checking clear"
« on: November 25, 2021, 08:36:32 am »
Does anyone know what is going on when the Megatouch boot up enters "Checking Clear"? I have a Megatouch Ion that gets stuck there, if I reboot it, then boot is fine and it passes. The next day I start the machine and the same thing, gets stuck at "Checking clear", reboot it and its fine again. Wondering what's up? Thanks for any tips.

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 703
  • Last login:Today at 03:07:01 pm
Re: Megatouch "Checking clear"
« Reply #1 on: December 05, 2021, 02:30:16 pm »
try turning off all dip switches, and if they are all off, or a bunch were on try only flipping dip 3 on. Its probably a watchdog issue. Ive seen some machines wanting dip 3 on and some wanting dip 3 off for some reason.

arcadezz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 18
  • Last login:June 21, 2022, 08:32:03 am
Re: Megatouch "Checking clear"
« Reply #2 on: December 05, 2021, 04:34:51 pm »
All the dip switches were off....I tried putting 3 "on" and still the same issue.