Switchres 2.002 - Linux - Could not find video mode...

[OverRide]

Hello. Looking for some advice on the below output: "could not find a video mode that meets your specs".
Let me know if any other info is required. Thanks!

OS:
Linux Linux01 5.11.0-40-generic #44~20.04.2-Ubuntu SMP Tue Oct 26 18:07:44 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

Video card info (older onboard NVIDIA):
02:00.0 VGA compatible controller: NVIDIA Corporation C79 [ION] (rev b1)
   Subsystem: AOPEN Inc. C79 [ION]
   Kernel driver in use: nouveau
   Kernel modules: nvidiafb, nouveau

Switchres info and error:
~/src/switchres$ ./switchres 320 240 60 -m ntsc -s
Switchres(v2.002) display[0]: monitor[ntsc] generation[on]
Switchres: Monitor range 15734.26-15734.26,59.94-59.94,1.500,4.700,4.700,0.191,0.191,0.953,0,0,192,240,448,480
Switchres: Calculating best video mode for 320x240@60.000000 orientation: normal
Switchres: could not find a video mode that meets your specs
Press ENTER to exit..

Switchres.ini info:
monitor ntsc
display VGA-1
*Everything else left as default

[makya]

Hello, your range allows 59.94Hz only while your are requesting 60 Hz. Try generic_15 instead of NTSC.

[OverRide]

Thanks Makya. Same result when using generic_15.

[Calamity]

The problem is probably the display name, you're using VGA-1 which looks like a kernel display name, you have to use Xorg names instead, type xrandr to get a list of active display names, or simply use its number 0, or 1, instead of its name. Tip: instead of editing switchres.ini, you can just use the -d command line switch.

[OverRide]

Thanks Calamity.

Had to install 'libdrm-dev' and rebuild. All good now.

[Substring]

Where you trying on KMS ?

[OverRide]

No. X11. Maybe if I had specified the API type as x11?

Sent from my SM-G991W using Tapatalk

[Substring]

Weird .. The makefile doesn't build the KMS backend if the required libdrm version requirement is not met (part of the 3 top messages when building SR). libdrm is not involved in the X11 backend ...

[OverRide]

Yeah. I realized that after you posed your question. I plan to start from scratch (hopefully today), document the process and see where things go wrong. Decide from there if it is a bug or just me.

[OverRide]

Looks like it was just me. Ran through the same setup process as before. Everything appears to be working. 

sudo apt update
sudo apt upgrade
sudo apt install git libxrandr-dev
git clone https://github.com/antonioginer/switchres
cd switchres
make
./switchres 320 240 60 -s -d 0


Thanks Substring!