| Main > Project Announcements |
| My Bucket List |
| << < (5/6) > >> |
| abispac:
So, i built the cabinet today, for robotron mini and most two joysticks games. I went with this kind of model with no marquee, to keep the cabinet as small as i can. This is going to have a 13 inch crt rgb moded disney tv, with a raspberry pi4 with a vga666 and rgb-pi os4 as the front end. Im so exited , to bad im not gonna get the stickers until monday. |
| abispac:
Got the cabinet assembled and working allready, now i got the artwork ready to print. I apologize for the watermark, but im not the owner of the image. If you want this, you can contact the owner at facebook with the waterimage name on it. |
| abispac:
Getting there, next step , the edge molding and resin on the sticker, for a glossy finish plus protection. |
| Zebidee:
You didn't do the T-mold slot routing before assembly, and you didn't round those inside corners, so maybe this is true!!: |
| abispac:
i dont use tmolding anymore, a use an edge molding with an adesive that you need to iron. it looks good. About the corners, i wanted to see how it looks like that. |
| Navigation |
| Message Index |
| Next page |
| Previous page |