Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: trend 2mm slot cutter for t-molding  (Read 4807 times)

0 Members and 1 Guest are viewing this topic.

firedance

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 290
  • Last login:Today at 08:49:17 am
trend 2mm slot cutter for t-molding
« on: June 24, 2021, 09:56:21 am »
Following on from a post in the project announcement forum i thought it best to post here.

Took a gamble on a 2mm slot cutter for t-molding as all the posts i read were saying that you needed 1/16" (1.5875mm) cutter, seems to work perfectly in 18mm mdf and holds it very tight, guess its because its quite fibrous, might be a different story in plywood.

https://www.trenddirectuk.com/trend-c143bx1-4tc-2mm-slotting-cutter

got mine for less than 20 and with all trend tools its very sharp and will last longer then the chinese cheesemetal ones you see on ebay.

just used a scrap piece of MDF and eyeballed it centre for a test ;D

The t-molding i got claimed to be 19mm but its more like 19.4mm using a Calliper, shouldn't really tell once its installed in a vinyl wrapped bartop  ;)