Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Need help with USB2Gun Cab  (Read 4014 times)

0 Members and 1 Guest are viewing this topic.

Purple Tophat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 90
  • Last login:April 16, 2022, 11:38:59 pm
  • Will pay cash for working time machine
Need help with USB2Gun Cab
« on: July 17, 2021, 08:50:43 am »
Hello!

Is there anyone who might be able to help me with my USB2Gun build?

I am down to:

1. Calibration. I donít know where to go and what to do to calibrate my guns.

2. Setting up recoil and screen flash duration in Mamehooker. Iíve found my VID and PID but donít know what actual sequence to put into the default ini file and how to do that. Also donít know if there is anywhere else I need to input anything.

Iím a bit out of my depth on this stuff so if anyone can help me out, I would appreciate it very very much!
Unbeatable Mortal Kombat Master

Purple Tophat

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 90
  • Last login:April 16, 2022, 11:38:59 pm
  • Will pay cash for working time machine
Re: Need help with USB2Gun Cab
« Reply #1 on: July 18, 2021, 12:21:57 pm »
So I found the calibration screen and have gone through the process a bunch of times. The first time I track the crosshairs around the screen it goes all the way around. The second time it will not recognize the bottom 1/3rd and right 1/4 of the screen. Any ideas? Otherwise everything is calibrated fine. Just canít shoot the bottom or right side with either gun. Any help?
Unbeatable Mortal Kombat Master

Jollywest

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 277
  • Last login:April 22, 2022, 02:21:23 am
Re: Need help with USB2Gun Cab
« Reply #2 on: August 15, 2021, 09:45:07 am »
Sent you a PM Erich