Author Topic: Vanguard cabinet CRT to VGA issues (Read 4408 times)

Tgr0071 · « **on:** June 30, 2021, 10:24:07 am »

My daughter was given a Vanguard cabinet without a monitor. We are trying to use the GBS8200 converter board to get it to play on an old LCD we had lying around.

The game does play "blind."

However, we cannot get a consistent signal to the monitor and when the image does come through it is garbled.

I am a total newly at this and just want to fix this for her.

I have attached pics of what we are using. We have even tried the board powered through the cabinet with same results. I would appreciate any help. Thanks

Zebidee · « **Reply #1 on:** July 07, 2021, 07:10:22 am »

Looks like you're trying to output 15khz CGA signal to a LCD that prefers VGA 31khz+.

Why not connect to LCD via the VGA output?

Mike A · « **Reply #2 on:** July 07, 2021, 07:17:02 am »

You could always get a 19 inch arcade monitor.

I own a Vanguard cab. It is a fun game.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Vanguard cabinet CRT to VGA issues (Read 4408 times)

Tgr0071

Vanguard cabinet CRT to VGA issues

Zebidee

Re: Vanguard cabinet CRT to VGA issues

Mike A

Re: Vanguard cabinet CRT to VGA issues