Arcade Lounge , Filling The Void

Main > Project Announcements

<< < (6/6)

emphatic:
Your image isn't loading.

Martijn:
Should be working now :cheers:

To get the screen to fit, i had to remove material from the upper joist, otherwise it would not fit..

And the new display was way thinner than the old one, because it has a external power supply.

So i made spacers on the display and screen mounting plate.

After that it fits perfect!

And i added 4 long screw pins to mount the screen. There was no way i could screw it tight again , i can't get behind the display anymore. It took up all the space to reach..
After sliding the display into the holes of the wooden spacer and mounting plate. It holds its place very well.

Then i made a new screen bezel.

Luckily, i had some leftover laminate.

After it dried i cut out the center to the correct size.

All done..

Turned out great.

Then i added the plexi back.

I absolutely love this screen. It's like a 25" CRT horizontal and vertical. !

Now i will continue on the control panel.

Adding a pacled controller and 2x fighting boards and a USB hub on that control panel will be a challenge.

emphatic:
That screen looks gorgeous. :cheers:

Navigation

 Message Index

Go to full version