Author Topic: Built a keypad/display (Read 3377 times)

scottydj2 · « **on:** May 11, 2021, 07:39:06 pm »

Hi,

Just in case this is of interest to anyone else......

As my hideaway jukebox didn't come with a keyboard/display unit (only an external wall box), I needed a keyboard and display to access the programming mode on the CCC.
As I needed some schematic/PCB practice, I built a little combined keypad display unit as shown below.
The LED's are a bit bright, but only one wire mod was required to bring it to life.
Result!

Cheers

Scott

Zebidee · « **Reply #1 on:** May 11, 2021, 08:58:36 pm »

Nice.

What keyboard/LED unit did you use?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Built a keypad/display (Read 3377 times)

scottydj2

Built a keypad/display

Zebidee

Re: Built a keypad/display