Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Win 10 Driver issue? Fix = no fast boot  (Read 2078 times)

0 Members and 1 Guest are viewing this topic.

Sledge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 495
  • Last login:September 25, 2022, 05:22:55 am
Win 10 Driver issue? Fix = no fast boot
« on: April 16, 2021, 06:39:22 am »
Hi all,
I've just upgraded my mamecab with Windows 10,Dell 9010, AMD r5 230, and after a few issues have pretty much got everything running as well as i can.
However i have got this one small issue at the bottom of the screen. I'm not sure how to describe it so i've taken a video and photos.
I'm using the Arcade_15EX preset, which seems to work better for me than the MS9-29 one that i used to use.

   arcade_15ex
      crt_range0  15625-16500, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.192, 1.024, 0, 0, 192, 288, 448, 576

Any ideas what i might need to adjust to get rid of the 'junk' at the bottom? The pictures don't really show it very well..





Thanks for any advice!

Edit: the screen might be running in the wrong mode? IE: non interlaced...
If i disable EDID emulation, everything clears up (interlaced mode?), but if i reboot, then the 'junk' comes back down the bottom, (non-interlaced?)
« Last Edit: April 16, 2021, 07:31:07 am by Sledge »

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7411
  • Last login:March 14, 2024, 05:26:05 am
  • Quote me with care
Re: Driver issue?
« Reply #1 on: April 16, 2021, 06:42:54 am »
Is that card flashed with ATOM-15?
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

Sledge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 495
  • Last login:September 25, 2022, 05:22:55 am
Re: Driver issue?
« Reply #2 on: April 16, 2021, 06:55:40 am »
Is that card flashed with ATOM-15?
yes

EDIT: I flashed the original BIOS back, and now it doesn't exhibit the issue...
But of course i get double/corrupted image during boot etc (would love to not have this)
« Last Edit: April 16, 2021, 07:03:42 am by Sledge »

Calamity

  • Moderator
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7411
  • Last login:March 14, 2024, 05:26:05 am
  • Quote me with care
Re: Driver issue?
« Reply #3 on: April 16, 2021, 07:11:01 am »
You need to disable Fast Boot..

Then, you can flash your card again.
Important note: posts reporting GM issues without a log will be IGNORED.
Steps to create a log:
 - From command line, run: groovymame.exe -v romname >romname.txt
 - Attach resulting romname.txt file to your post, instead of pasting it.

CRT Emudriver, VMMaker & Arcade OSD downloads, documentation and discussion:  Eiusdemmodi

Sledge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 495
  • Last login:September 25, 2022, 05:22:55 am
Re: Driver issue?
« Reply #4 on: April 16, 2021, 07:26:56 am »
You need to disable Fast Boot..
Perfect thanks!

Power Options > Choose What The Power Buttons Do (on the left side menu) > Change Settings That Are Currently Unavailable > uncheck fast boot.

But now galaga is offset to the left by about 1 inch, so i'll have to adjust my monitor settings, will try ms9-29 again
« Last Edit: April 24, 2021, 06:17:41 am by Sledge »