So I finally pulled the trigger and replaced my CRT with the 33” 1:1 monitor from Alibaba. Here are my thoughts:
https://www.alibaba.com/product-detail/New-LVDS-eDP-LCD-Controller-board_1600188966039.html?spm=a2700.galleryofferlist.normal_offer.d_title.3ddd26d2wi3B6P —First, I know, sacrilege to use a panel instead of a CRT.
—That out of the way, I adore this monitor. BIG, BRIGHT, HD picture!
—It is a PERFECT drop in replacement for the 27” Betson I had in there. And I do mean PERFECT; there is about a half inch clearance all the way around the monitor
—Resolution is 1920 x 1920 @ 60hz
—I did notice a bit of tearing last night but I haven’t dug into tweaking options and what not to address this. Right now, just working on getting everything up and running again on the higher resolution
—Finally I can play higher rez stuff like TeknoParrot without additional loaders that force lower resolutions. And I can PC game at full 1080!
—I have it set to 1920 x 1440 (4:3 ratio) so the top and bottom of the monitor are black bars. This is perfect because my control panel comes right up to the bottom of the 1440 resolution and the speaker section comes right up to the top.
—Games can change the resolution to get the full 1920 vertical if needed. I’ll need to rebuild a cabinet around this screen because of the points made in the previous bullet
—My Sinden lightguns are working much better with this screen
—I paid more than I wanted to for a one off sample (700 + shipping) but I’m glad I did, really happy with this screen!
—If any of you are thinking of getting one, you should all pool together to buy in bulk to bring that price down
now with pics attached!