Hey all, i'm in the first stages of trying to get my cabinet converted over to a proper CRT output (was previously using S-Video out on an old card, and it wasnt great).
So I picked up a R7240-2GD3-L card, but its missing the ribbon cable which has the VGA output. Unfortunately it's other ports are DVI-D and HDMI, so i pretty much need this.
So i figured I would try to find the pinouts of this header, and wire them up to my encoder directly.
I've done countless google searches trying to find the pinout on this 12pin header, with no luck. So i'm hoping someone has been through a similar scenario, and might already have done the research?
With only 12 pins, and 4 of them ground which i've already verified, it leaves me with 8 pins of unknown, 5 of which are putting out 4ish VDC, and no way to know whats what.
I'll be attempting to output this signal to a Neobitz RGB encoder, as it has Y/C output which I need. Plus its the only encoder i could find for sale anywhere. So i'm assuming i'll need to enable composite sync in the CRT Emudriver or Atom15 once its all working correctly.
Thanks in advance!