Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Neo Geo MVS Control Panel - Value?  (Read 851 times)

0 Members and 1 Guest are viewing this topic.

yellowsnow4free

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:July 10, 2021, 01:25:45 pm
  • I want to build my own arcade controls!
Neo Geo MVS Control Panel - Value?
« on: March 30, 2021, 03:07:06 pm »
Hi everyone,

I apologize in advance if I'm posting this in the wrong place.

I picked up a Neo Geo MVS control panel locally about 2 years ago now.  I'll give more details in a second, but here's a picture:



Unfortunately, a previous owner drilled out two of the carriage bolt holes to install those buttons.  I'm sure it could be fixed if you have access to a welder.
Additionally, the wires they connected to the microswitches were soldered on, so there's some excess solder on the contacts.

I haven't tested the switches, but it's all there in terms of buttons and microswitches.  Albeit, some of them are mismatched and whatnot.
There's no memory card or headphone jacks, but the blockout place is in place.
3 of the 4 corners of the control panel overlay are broken off, and of course there are those 4 holes drilled in it where the buttons were installed.

I'm hoping to sell this locally if this is worth anything.  I didn't spend much for it, luckily, but if it's truly worthless I'll give it away.

Thanks!