Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Coin Mech on a JVL Vortex  (Read 4833 times)

0 Members and 1 Guest are viewing this topic.

bigdan11

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:July 08, 2021, 03:08:35 pm
  • I want to build my own arcade controls!
Coin Mech on a JVL Vortex
« on: March 01, 2021, 03:38:52 pm »
Bought 4 JVL Vortexs. None had coin mechs in them, I tried the electronic mechs we have but will only show the quarter and looinie but not the toonie (Canada) so they aren't programmed for JVL.. I do see there is a mount for a board at the bottom of the mech housing to mount a little sensor board and use a mechanical mech. I bought the only board I could find on the net. I'm wondering if anybody could point me in the direction to get some sensor boards or a electronic mech that is programed for JVL

1st

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14
  • Last login:November 03, 2021, 11:01:33 pm
  • I want to build my own arcade controls!
Re: Coin Mech on a JVL Vortex
« Reply #1 on: March 02, 2021, 11:14:43 pm »
I saw one posted on c/l on Long Island. I know zero about JVL, never saw one in person.

lilshawn

  • Moderator
  • Trade Count: (+3)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 6860
  • Last login:May 18, 2022, 06:44:21 pm
  • I break stuff...then fix it...sometimes
Re: Coin Mech on a JVL Vortex
« Reply #2 on: April 26, 2021, 03:36:16 pm »
JVL electronic mechs are programmed...

25c- coin line 1
$1 - coin line 2
$2 - coin line 1 and 2 at the same time.

No idea why the did this...but whatever.