Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Megatouch Reinstallation  (Read 4396 times)

0 Members and 1 Guest are viewing this topic.

carfnann

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:March 20, 2021, 06:20:30 am
  • I want to build my own arcade controls!
Megatouch Reinstallation
« on: February 14, 2021, 11:50:11 am »
Hi There,

I'm trying to help a friend who get a Megatouch with a fried HD.
I wanted to reinstall the whole system, and based on the security key SA3056-08 I have assumed it is a Ruby version.
So I have downloaded the Ruby ISO on a website.

I've burn the ISO, and place a new HD and CD rom into the cabinet.
The installation starts but then block with the following message :
"Not Enough Memory Detected!
Required : 64 Megabytes
Detected : 29 Megabytes"

I'm quite confused...
Is Ruby required 64Mb? then why it was ok before with this security key?
Is there 2 version of Ruby? one with 32Mb and one with 64Mb?

What should I do :
* identify an other ISO to be installed?
* Buy extra RAM? SD-RAM PC100 if I'm not wrong...

Thanks for your help

Spank

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:March 23, 2024, 07:49:40 pm
  • I like to help out.
Re: Megatouch Reinstallation
« Reply #1 on: February 15, 2021, 11:59:29 am »
You can pick up a 128meg of pc100 or pc133 cheap enough.
Someone must of swapped the drive and key from another game.