Arcade Collecting > Merit/JVL Touchscreen

Jvl Echo HD3 image

<< < (2/3) > >>

mahkeymike:
Thats an image from my google account. You need to use USB Image Tool https://www.alexpage.de/usb-image-tool/download/to clone it to a SD Card. Must be an Original 4gb SD Card, or another 4+gb SD card. I can tell you from experience, 4gb PNY SD cards are slightly undersized and this image will not fit. That is why i suggested getting a 8gb.
You will obviously need a SD card reader to clone this .img (raw image).

Zedmag:
Shawn I’m running win10 and it claims the image is Corrupt. Using power iso it shows that it’s got 3 Linux Partitions and a small fat32.

Zedmag:
And mike- I’ll give that shot when I get home in two weeks. Thanks for the heads up

mahkeymike:

--- Quote from: Zedmag on December 04, 2020, 12:01:19 am ---Shawn I’m running win10 and it claims the image is Corrupt. Using power iso it shows that it’s got 3 Linux Partitions and a small fat32.

--- End quote ---
Its because HD3 is running on Linux. Its a linux image.

--- Quote from: Zedmag on December 04, 2020, 12:02:12 am ---And mike- I’ll give that shot when I get home in two weeks. Thanks for the heads up

--- End quote ---

Thats your only shot. I told you what you need to do, if you can't figure it out, then you might wan to buy a pre imaged SD card. I am removing that image from my google account as it cost me. You're welcome.

Zedmag:
Yea thanks for the confirmation. Prior posts sorta lead it on to be a cd img. So before I left town that’s the route I went down. But when I get back I’ll attempt to img it to an SD card. Thanks again.

Navigation

[0] Message Index

[#] Next page

[*] Previous page