Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Free play and light bulbs for CTI-1  (Read 1637 times)

0 Members and 1 Guest are viewing this topic.

josephhartz

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:November 13, 2020, 11:21:28 am
  • I want to build my own arcade controls!
Free play and light bulbs for CTI-1
« on: November 12, 2020, 04:44:46 pm »

Hi
I have a 1974 CTI-1 Rowe/Ami Crestwood.
Just a simple question
It is on free play since I bought it.
I drilled out the cash box lock( the lid lock is operated by a screwdriver) and would like to take it back and forth between free play and coin operated. How do I do this?
The choices are on, off, scan. The lid automatically sets the switch to on.
The switches under the plexiglass are 2 lines 1-3 and 4-6. They are on 1 and 4.

Also what number are the bulbs for selection light up they are missing.