| Main > Main Forum |
| powering PC speakers in a MAME cabinet |
| << < (2/6) > >> |
| krick:
--- Quote from: crashwg on February 22, 2004, 02:48:20 am ---Why not just hook up the power "brick"? --- End quote --- Because that would require me to put a power strip inside my cab. I'm hoping to avoid that if possible. |
| CthulhuLuke:
I HIGHLY suggest Oscar's method, just make sure the speakers you get are stereo speakers, well I mean you can get a mono set of speakers, but it sounds much clearer when you have a stereo output. It hooks up exactly the same as a mono, but it's stereo ya know. Usually a stereo set of speakers is only 5 dollars more, I got my set that came w/ a subwoofer for $15.99. Cyber Acoustics at Fred Meyer, works like a charm. |
| krick:
I think everyone is missing the pont of my post. I intend to use the oscar controls method. The only difference is that I want to ditch the power brick and power them off of the PC power supply. I just wanted to run my plan past a few more sets of eyes to see if there was anything I was overlooking. Ya know, maybe someone else had tried this before and found a problem with it that I didn't consider. |
| Macros:
Check out my post at the end of this thread. http://www.arcadecontrols.org/yabbse/index.php?board=5;action=display;threadid=13387 |
| SirPeale:
Just found out how to reference specific posts, wanted to show you all. http://www.arcadecontrols.org/yabbse/index.php?board=5;action=display;threadid=13387#msg117358 Note the #msg and the message number at the end of the URL. |
| Navigation |
| Message Index |
| Next page |
| Previous page |