| Main > Buy/Sell/Trade - non-retail |
| WTB: Namco Plate for Midway Pac-Man |
| << < (2/2) |
| PL1:
--- Quote from: ED-209 on October 20, 2020, 06:24:32 pm ---what type of clear is best? Regular clear spray like Rustoleum or would Krylon Triple Thick work as I have some of that? --- End quote --- According to the link above, Sergio used a light coat of Krylon Triple-Thick. Not sure how that would look compared to the lamination technique. :dunno --- Quote from: ED-209 on October 20, 2020, 06:24:32 pm ---Any suggestions on a place to get a similar plate like they used? --- End quote --- Unless you get some plate blanks from a "Things Remembered" or trophy shop, you're probably going to have to cut them from a larger piece of material. Not sure about the thickness, but it's hard to beat the price on this 3" x 7" aluminum flashing. https://www.lowes.com/pd/Amerimax-3-in-x-7-in-Aluminum-Step-Flashing/3284366 Scott |
| jdbailey1206:
ED read over page 2 (3/4 of the way down) of my build thread. It should help you if you want to do a self made plate. I believe I used .019 thick piece of aluminum from Home Depot and Rustoleums Triple Thick Glaze. Also I found this website that creates custom plates. I have not used them and I don't endorse them but its worth a try. |
| ED-209:
Thanks so much everyone for all the help, advice and suggestions. It looks like so far no one has any of these to sell so I’m gonna try to make one using Sergio’s guide and ordered the thicker metal business cards and some clear Neato labels so we’ll see. I am hoping there’s already a template made for this specific Namco\Midway one like on CoryBee’s first post as I’m not very good with image editing and only have Gimp. Fingers crossed. |
| Navigation |
| Message Index |
| Previous page |