| Arcade Collecting > Restorations & repair |
| Golden Tee 2005 will not boot |
| (1/1) |
| LongJohns:
I basically get what is shown in this video: What I have is the green board version 6. I have done: - Replaced IC sockets for: boot and security IC's - there was some corrosion on the pins for U15. - Verified that U15 (v1.06) is good (compared with the ROM image from MAME). - verified power +12 and +5 volts (5.08V at U15). - hard drive seems to check out - there are no errors when I scan it on my PC. - video card works - tested on a PC. Read someplace that holding down the start button at power up does some sort of diagnostics. When I do this, Status 1 LED flashes 2 times, but I am unable to locate exactly what this means. If I disconnect the hard drive, the 2 green LED flash at a constant rate. |
| Navigation |
| Message Index |