Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: FS: 4-way Joy Base w/Leaf switches (Wico) (Hackensack/Lodi/Paramus - North NJ)  (Read 1716 times)

0 Members and 1 Guest are viewing this topic.

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4413
  • Last login:Today at 01:48:44 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Grommet is like NEW (Very Tight, No Cracks).
Leafs are in good condition.

Come pick it up Northern NJ (Bergen County)

WYSIWYG

Best offer accepted.

« Last Edit: September 28, 2020, 04:22:02 pm by Thenasty »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4413
  • Last login:Today at 01:48:44 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Good News but big BAD NEWS  :banghead:


I found a Joystick (re-union), Spring, inner plastic washer, Dust washer (still no actuator) and tried to make a working set.

The grommet ID was to tight for the joystick, so I tried to widen it and ..................................... broke it  :banghead: :banghead:


So now, no GROMMET.......... ($15.00 for a new one. Not buying one).


Shoot me an offer. WYSIWYG


here is the set.

Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4413
  • Last login:Today at 01:48:44 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
this re-union joystick is probably not made to fit GROMMET type joystick that's why it was tight and I tried to mod it.

So maybe I should keep the joystick because it's not right joystick for this unit (if you buy the grommet).

So, make offer for the 4-way base (no joystick)
« Last Edit: September 30, 2020, 08:27:18 pm by Thenasty »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4413
  • Last login:Today at 01:48:44 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
To late, wish found it it sooner before I broke the grommet.

Found this BAT Style Joystick (can't find a Ball top). This is the right diameter for that Grommet.

Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0