Main > Lightguns

Use RCPS3 Move Games with Lightgun using scripts

<< < (3/37) > >>

Jayinem:
The less reasons I have to use PS Move the better.

phasermaniac:
I think you have to have first pad configured to move in the menus.
what I made is overwrite the pad circle and triangle with the guns ones (R+L button=circle R+MButton=triangle)

lllll44:

--- Quote from: Jayinem on August 30, 2020, 02:28:29 pm ---From my experience it only works in Windowed full mode, if I do fullscreen the aiming is all over the place. Is this correct or am I doing something wrong?

--- End quote ---
thats right, its not possible with "true" fullscreen, thats the point of the script:)
also, for the script you made...
i need to press c and v at the same time for the "triangle" button?

phasermaniac:
no, c is circle and v triangle

Jayinem:

--- Quote from: lllll44 on August 30, 2020, 02:43:59 pm ---
--- Quote from: Jayinem on August 30, 2020, 02:28:29 pm ---From my experience it only works in Windowed full mode, if I do fullscreen the aiming is all over the place. Is this correct or am I doing something wrong?

--- End quote ---
thats right, its not possible with "true" fullscreen, thats the point of the script:)
also, for the script you made...
i need to press c and v at the same time for the "triangle" button?

--- End quote ---

The script was made following your own post lol


--- Quote from: lllll44 on August 29, 2020, 05:45:46 pm ---U use the "psmove mode" in rpcs3?
for triangle button, you need to press middle button+right mouse click.
after that you need to exit the calibration with o buttion, so you need to press left mouse button + right mouse button.

--- End quote ---

This works for me, but sometimes it takes a few times to left click and right at the same time.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version