Hi Ken, or anybody who can help on this one,,
I got hold of one of the dual volume controls.
I followed the instructions that you had sent me on a previous post about which speaker connections on the amp to remove and which to re-connect.
Wired the appropriate cables onto the board that covers the amp from the volume control and moved the jumper over as per instructions.
Tried it and hit a problem.
The new speakers are on full blast and cannot be controlled.....
I have re-set the juke box to the original wirings and used the control to alter the volume as if it could not perform the dual volume function. Still left the new speakers connected but tested both volume dials on the control and they work fine.
Hope all this makes sense, but any ideas?